Merge pull request #113 from rbalsleyMSFT/2410.1

2412.1

ChangeLog.md

@@ -1,5 +1,50 @@
 # Change Log
 
+## **2409.1**
+
+### Fixes
+
+- Fix an issue with removal of Defender/OneDrive/Edge after FFU is complete
+- Migrate Winget downloads to use [Export-WingetPackage cmdlet](https://github.com/microsoft/winget-cli/blob/master/doc/specs/%23658%20-%20WinGet%20Download.md#winget-powershell-cmdlet) as per issue #50
+- Add support for preview updates https://github.com/rbalsleyMSFT/FFU/pull/51 - thanks to @HedgeComp
+- Refactor validation of Unattend/prefixes, PPKG, Autopilot to check for these files early in the process, similar to how we check for drivers
+- Add better logging when unable to find HDD when applying FFU. Will inform to add WinPE drivers to Deployment Media if HDD not found.
+- Remove ValidateScript on InstallDrivers and break it out in a validation block so -Make and -Model can be specified anywhere in the command line
+- Add validation for VMHostIPAddress and VMSwtichName and inform the user if these don't match. Should prevent issues where the FFU isn't getting created.
+- Removed installation of the Windows Security Platform Update as it has been removed from the MU Catalog. See issue #58
+- Thanks to w0 for PR #54 to change the validation set for WindowsSKU
+- Thanks to @zehadialam for PR #60 to fix an issue with Windows boot loader for certain devices where Windows Boot Manager is not the first boot entry after the FFU is applied.
+- Thanks to @HedgeComp  for PR #64 and PR #65
+
+## **2408.1**
+
+### External Drive Support
+
+Up until now, the USB build process has supported using drives identified by Windows as removable drives. Most USB sticks will identify as removable, however faster drives may show up as external hard disk media. You may also have a smaller, portable SSD drive that you'd like to use for imaging since these are typically much faster than regular USB 3.x thumb drives.
+
+In adding this support, I do realize that there is potential for data loss for those that might have external hard drives attached to their machines.
+
+To handle this, with help from [HedgeComp](https://github.com/HedgeComp), we've refactored the `Get-USBDrives` function. Two new variables have been created:
+
+| Parameter                   | Type | Description                                                                                                                                                                                                                                                                                                                                    |
+| --------------------------- | ---- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| AllowExternalHardDiskMedia  | Bool | If `$true`, will allow the use of media identified as External Hard Disk media via WMI class Win32_DiskDrive. Default is not defined.                                                                                                                                                                                                        |
+| PromptExternalHardDiskMedia | Bool | If `$true` and AllowExternalHardDiskMedia is `$true`, the script will prompt to select which drive to use. When set to `$true`, only a single drive will be created. If `$false`, the script won't prompt for which external hard disk to use and can use multiple external hard disks, similar to how removable USB drives function. |
+
+By default, this functionality won't effect previous USB drive creation behavior. However if you want to take advantage of the new functionality, set `-AllowExternalHardDiskMedia $true`
+
+Fixes/misc
+
+- Fixed a display issue where if multiple FFU files were in the FFU folder, the script wouldn't display which FFUs to choose from when running the script without -verbose. This will now display a table with the last modified date whether you run with the -verbose switch or not.
+- Added start/end/duration time (thanks [HedgeComp](https://github.com/HedgeComp))
+- Fixed an issue where deployment media wasn't prompting for a key to be pressed as expected
+- Fixed an issue when creating the USB drive and the drive had a RAW partition style that clear-disk would generate an error
+- Cleaned up some commented code
+- Added Create-PEMedia.ps1 as a helper script to quickly generate Deploy or Capture media
+- Fixed an issue with clean up of Defender/OneDrive/Edge
+- Fixed an issue with the formatting of InstallAppsandSysprep.cmd file
+- Updated parameter documentation in the script to include newly added parameters
+
 ## **2407.1**
 
 This is another major release that includes:
@@ -16,7 +61,7 @@ To support the newly released Copilot+ PCs, we now support the creation and depl
 * The host machine you're building the FFU from must be ARM64
 * Office/M365 apps don't currently support installing the ARM64 native bits from an offline system. If you pass `-InstallOffice $true`  the script will change the value to false. You can install office after the fact when connected to the internet. I'm investigating this behavior and will issue a fix if/when this gets resolved. I still don't recommend building the FFU VM on the internet.
 * The [Defender Updates Site](https://www.microsoft.com/en-us/wdsi/defenderupdates) provides download links for Defender definitions. The ARM link doesn't work for ARM64 and mpam-fe.exe fails to install. However there might be an undocumented ARM64 URL that may work. I've included it, but haven't tested it as I'm writing these notes. So we'll see if that works out.
-* Drivers - I know Surface Laptop 7 and Pro
+* Drivers - Surface Laptop 7 and Pro 11 don't have ARM64 drivers available yet (there are entries, but they just point to a .txt file). Other OEMs may have drivers available.
 
 In all, testing has gone very well.
 
@@ -24,7 +69,7 @@ In all, testing has gone very well.
 
 Big thanks to [Zehadi Alam](https://github.com/zehadialam) for his contributions to get this added to the project. You can now add any application in the msstore or winget source via the Winget command line utility. In the 1.8 Winget release the ability to download apps from the msstore source was added, which means being able to download apps like the Company Portal. For those of you that have been asking for Company Portal to be inbox in Windows, this is the next best thing. The script will check if Winget 1.8 is installed and if not, it'll install it.
 
-The way this works is if `-InstallApps $true`  and the FFUDevelopment\Apps\AppList.json file exists, whatever apps defined in that json file will be downloaded via Winget and will be installed in the FFU VM prior to capture. We've included two files: AppList_InboxAppsSample.json and AppList_Sample.json. The AppList_InboxAppsSample.json contains all of the apps that are installed in Windows by default and are searchable via `winget search AppID` . Some of these apps do not download and we're investigating why they come up via search, but fail to download. The AppList_Sample.json has Company Portal and New Teams. 
+The way this works is if `-InstallApps $true`  and the FFUDevelopment\Apps\AppList.json file exists, whatever apps defined in that json file will be downloaded via Winget and will be installed in the FFU VM prior to capture. We've included two files: AppList_InboxAppsSample.json and AppList_Sample.json. The AppList_InboxAppsSample.json contains all of the apps that are installed in Windows by default and are searchable via `winget search AppID` . Some of these apps do not download and we're investigating why they come up via search, but fail to download. The AppList_Sample.json has Company Portal and New Teams.
 
 ![1721678632154](image/ChangeLog/1721678632154.png)
 
@@ -37,12 +82,14 @@ In sticking with the idea of having the most up to date Windows build, inbox sto
 
 Updated means latest .NET, Defender (definition and platform updates), Edge, OneDrive, and all updates available via Winget for Store Apps have been provisioned in the FFU. The numbers in the table are cumulative, meaning the FFU was laid down, store apps were updated via running Get Apps from the Microsoft Store app and data usage was gathered from Settings, then Windows Update was manually kicked off via Settings and data usage was gathered.
 
-In order to get apps to help build your AppList.json file, just run `winget search "AppName"`  
+In order to get apps to help build your AppList.json file, just run `winget search "AppName"`
 
 ![1721679421727](image/ChangeLog/1721679421727.png)
 
 In this example we see that Firefox is published to both the msstore and winget sources. It's up to you which one you'd like to pick (I assume the msstore and the 128 version from the winget source are both the same version, but that may not be the case). You'll want to use the Name, ID, and Source values to help create your AppList.json file.
 
+When downloading msstore apps, it does require an Entra ID. If you're building your FFUs from a machine that is not signed in with an Entra ID, you will be prompted for credentials for each app you download AND for the license file for each app (2 prompts per app). If downloading many store apps is something you plan on doing, I highly recommend signing in with an Entra ID to prevent the authentication prompts.
+
 Other improvements
 
 * [mhaley](https://github.com/mhaley) made their first contribution to [assign the drive letter to the recovery partition when copying in a custom WinRE.wim](https://github.com/rbalsleyMSFT/FFU/pull/35)

FFUDevelopment/Apps/InstallAppsandSysprep.cmd

@@ -5,9 +5,12 @@ REM d:\Office\setup.exe /configure d:\office\DeployFFU.xml
 REM Install Defender Platform Update
 REM Install Defender Definitions
 REM Install Windows Security Platform Update
+REM Install Windows Malicious Software Removal Tool
 REM Install OneDrive Per Machine
 REM Install Edge Stable
 REM Winget Win32 Apps
+REM START Batch variables placeholder
+REM END Batch variables placeholder
 REM Add additional apps below here
 REM Contoso App (Example)
 REM msiexec /i d:\Contoso\setup.msi /qn /norestart
@@ -30,11 +33,8 @@ for /d %%D in ("%basepath%\*") do (
             ) 
         )
     )
-    @REM for %%F in ("!appfolder!\*.xml") do (
-    @REM     set "licensefile=%%F"
-    @REM )
     if defined mainpackage (
-        set "dism_command=DISM /Online /Add-ProvisionedAppxPackage /PackagePath:"!mainpackage!""
+        set "dism_command=DISM /Online /Add-ProvisionedAppxPackage /PackagePath:"!mainpackage!" /Region:all /StubPackageOption:installfull"
         if exist "!dependenciesfolder!" (
             for %%G in ("!dependenciesfolder!\*") do (
                 set "dism_command=!dism_command! /DependencyPackagePath:"%%G""
@@ -48,7 +48,6 @@ for /d %%D in ("%basepath%\*") do (
         ) else (
             set "dism_command=!dism_command! /SkipLicense"
         )
-        set "dism_command=!dism_command! /Region:All"
         echo !dism_command!
         !dism_command!
     )

FFUDevelopment/Create-PEMedia.ps1

@@ -0,0 +1,209 @@
+param (
+    [string]$FFUDevelopmentPath = $PSScriptRoot,
+    [string]$adkPath = 'C:\Program Files (x86)\Windows Kits\10\',
+    [string]$WindowsArch = 'x64',
+    [bool]$CopyPEDrivers = $false,
+    [string]$CaptureISO = "$PSScriptRoot\WinPE_FFU_Capture_x64.iso",
+    [string]$DeployISO = "$PSScriptRoot\WinPE_FFU_Deploy_x64.iso",
+    [string]$LogFile = "$PSScriptRoot\Create-PEMedia.log",
+    [bool]$Capture,
+    [bool]$Deploy = $true
+)
+
+function WriteLog($LogText) { 
+    Add-Content -path $LogFile -value "$((Get-Date).ToString()) $LogText" -Force -ErrorAction SilentlyContinue
+    Write-Verbose $LogText
+}
+
+function Invoke-Process {
+    [CmdletBinding(SupportsShouldProcess)]
+    param
+    (
+        [Parameter(Mandatory)]
+        [ValidateNotNullOrEmpty()]
+        [string]$FilePath,
+
+        [Parameter()]
+        [ValidateNotNullOrEmpty()]
+        [string]$ArgumentList
+    )
+
+    $ErrorActionPreference = 'Stop'
+
+    try {
+        $stdOutTempFile = "$env:TEMP\$((New-Guid).Guid)"
+        $stdErrTempFile = "$env:TEMP\$((New-Guid).Guid)"
+
+        $startProcessParams = @{
+            FilePath               = $FilePath
+            ArgumentList           = $ArgumentList
+            RedirectStandardError  = $stdErrTempFile
+            RedirectStandardOutput = $stdOutTempFile
+            Wait                   = $true;
+            PassThru               = $true;
+            NoNewWindow            = $true;
+        }
+        if ($PSCmdlet.ShouldProcess("Process [$($FilePath)]", "Run with args: [$($ArgumentList)]")) {
+            $cmd = Start-Process @startProcessParams
+            $cmdOutput = Get-Content -Path $stdOutTempFile -Raw
+            $cmdError = Get-Content -Path $stdErrTempFile -Raw
+            if ($cmd.ExitCode -ne 0) {
+                if ($cmdError) {
+                    throw $cmdError.Trim()
+                }
+                if ($cmdOutput) {
+                    throw $cmdOutput.Trim()
+                }
+            }
+            else {
+                if ([string]::IsNullOrEmpty($cmdOutput) -eq $false) {
+                    WriteLog $cmdOutput
+                }
+            }
+        }
+    }
+    catch {
+        #$PSCmdlet.ThrowTerminatingError($_)
+        WriteLog $_
+        Write-Host "Script failed - $Logfile for more info"
+        throw $_
+
+    }
+    finally {
+        Remove-Item -Path $stdOutTempFile, $stdErrTempFile -Force -ErrorAction Ignore
+		
+    }
+	
+}
+
+function New-PEMedia {
+    param (
+        [Parameter()]
+        [bool]$Capture,
+        [Parameter()]
+        [bool]$Deploy
+    )
+    #Need to use the Demployment and Imaging tools environment to create winPE media
+    $DandIEnv = "$adkPath`Assessment and Deployment Kit\Deployment Tools\DandISetEnv.bat"
+    $WinPEFFUPath = "$FFUDevelopmentPath\WinPE"
+
+    If (Test-path -Path "$WinPEFFUPath") {
+        WriteLog "Removing old WinPE path at $WinPEFFUPath"
+        Remove-Item -Path "$WinPEFFUPath" -Recurse -Force | out-null
+    }
+
+    WriteLog "Copying WinPE files to $WinPEFFUPath"
+    if($WindowsArch -eq 'x64') {
+        & cmd /c """$DandIEnv"" && copype amd64 $WinPEFFUPath" | Out-Null
+    }
+    elseif($WindowsArch -eq 'arm64') {
+        & cmd /c """$DandIEnv"" && copype arm64 $WinPEFFUPath" | Out-Null
+    }
+    #Invoke-Process cmd "/c ""$DandIEnv"" && copype amd64 $WinPEFFUPath"
+    WriteLog 'Files copied successfully'
+
+    WriteLog 'Mounting WinPE media to add WinPE optional components'
+    Mount-WindowsImage -ImagePath "$WinPEFFUPath\media\sources\boot.wim" -Index 1 -Path "$WinPEFFUPath\mount" | Out-Null
+    WriteLog 'Mounting complete'
+
+    $Packages = @(
+        "WinPE-WMI.cab",
+        "en-us\WinPE-WMI_en-us.cab",
+        "WinPE-NetFX.cab",
+        "en-us\WinPE-NetFX_en-us.cab",
+        "WinPE-Scripting.cab",
+        "en-us\WinPE-Scripting_en-us.cab",
+        "WinPE-PowerShell.cab",
+        "en-us\WinPE-PowerShell_en-us.cab",
+        "WinPE-StorageWMI.cab",
+        "en-us\WinPE-StorageWMI_en-us.cab",
+        "WinPE-DismCmdlets.cab",
+        "en-us\WinPE-DismCmdlets_en-us.cab"
+    )
+
+    if($WindowsArch -eq 'x64'){
+        $PackagePathBase = "$adkPath`Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\"
+    }
+    elseif($WindowsArch -eq 'arm64'){
+        $PackagePathBase = "$adkPath`Assessment and Deployment Kit\Windows Preinstallation Environment\arm64\WinPE_OCs\"
+    }
+    
+
+    foreach ($Package in $Packages) {
+        $PackagePath = Join-Path $PackagePathBase $Package
+        WriteLog "Adding Package $Package"
+        Add-WindowsPackage -Path "$WinPEFFUPath\mount" -PackagePath $PackagePath | Out-Null
+        WriteLog "Adding package complete"
+    }
+    If ($Capture) {
+        WriteLog "Copying $FFUDevelopmentPath\WinPECaptureFFUFiles\* to WinPE capture media"
+        Copy-Item -Path "$FFUDevelopmentPath\WinPECaptureFFUFiles\*" -Destination "$WinPEFFUPath\mount" -Recurse -Force | out-null
+        WriteLog "Copy complete"
+        #Remove Bootfix.bin - for BIOS systems, shouldn't be needed, but doesn't hurt to remove for our purposes
+        #Remove-Item -Path "$WinPEFFUPath\media\boot\bootfix.bin" -Force | Out-null
+        # $WinPEISOName = 'WinPE_FFU_Capture.iso'
+        $WinPEISOFile = $CaptureISO
+        # $Capture = $false
+    }
+    If ($Deploy) {
+        WriteLog "Copying $FFUDevelopmentPath\WinPEDeployFFUFiles\* to WinPE deploy media"
+        Copy-Item -Path "$FFUDevelopmentPath\WinPEDeployFFUFiles\*" -Destination "$WinPEFFUPath\mount" -Recurse -Force | Out-Null
+        WriteLog 'Copy complete'
+        #If $CopyPEDrivers = $true, add drivers to WinPE media using dism
+        if ($CopyPEDrivers) {
+            WriteLog "Adding drivers to WinPE media"
+            try {
+                Add-WindowsDriver -Path "$WinPEFFUPath\Mount" -Driver "$FFUDevelopmentPath\PEDrivers" -Recurse -ErrorAction SilentlyContinue | Out-null
+            }
+            catch {
+                WriteLog 'Some drivers failed to be added to the FFU. This can be expected. Continuing.'
+            }
+            WriteLog "Adding drivers complete"
+        }
+        # $WinPEISOName = 'WinPE_FFU_Deploy.iso'
+        $WinPEISOFile = $DeployISO
+
+        # $Deploy = $false
+    }
+    WriteLog 'Dismounting WinPE media' 
+    Dismount-WindowsImage -Path "$WinPEFFUPath\mount" -Save | Out-Null
+    WriteLog 'Dismount complete'
+    #Make ISO
+    if ($WindowsArch -eq 'x64') {
+        $OSCDIMGPath = "$adkPath`Assessment and Deployment Kit\Deployment Tools\amd64\Oscdimg"
+    }
+    elseif ($WindowsArch -eq 'arm64') {
+        $OSCDIMGPath = "$adkPath`Assessment and Deployment Kit\Deployment Tools\arm64\Oscdimg"
+    }
+    $OSCDIMG = "$OSCDIMGPath\oscdimg.exe"
+    WriteLog "Creating WinPE ISO at $WinPEISOFile"
+    # & "$OSCDIMG" -m -o -u2 -udfver102 -bootdata:2`#p0,e,b$OSCDIMGPath\etfsboot.com`#pEF,e,b$OSCDIMGPath\Efisys_noprompt.bin $WinPEFFUPath\media $FFUDevelopmentPath\$WinPEISOName | Out-null
+    if($WindowsArch -eq 'x64'){
+        if($Capture){
+            $OSCDIMGArgs = "-m -o -u2 -udfver102 -bootdata:2`#p0,e,b`"$OSCDIMGPath\etfsboot.com`"`#pEF,e,b`"$OSCDIMGPath\Efisys_noprompt.bin`" `"$WinPEFFUPath\media`" `"$WinPEISOFile`""
+        }
+        if($Deploy){
+            $OSCDIMGArgs = "-m -o -u2 -udfver102 -bootdata:2`#p0,e,b`"$OSCDIMGPath\etfsboot.com`"`#pEF,e,b`"$OSCDIMGPath\Efisys.bin`" `"$WinPEFFUPath\media`" `"$WinPEISOFile`""
+        }
+    }
+    elseif($WindowsArch -eq 'arm64'){
+        if($Capture){
+            $OSCDIMGArgs = "-m -o -u2 -udfver102 -bootdata:1`#pEF,e,b`"$OSCDIMGPath\Efisys_noprompt.bin`" `"$WinPEFFUPath\media`" `"$WinPEISOFile`""
+        }
+        if($Deploy){
+            $OSCDIMGArgs = "-m -o -u2 -udfver102 -bootdata:1`#pEF,e,b`"$OSCDIMGPath\Efisys.bin`" `"$WinPEFFUPath\media`" `"$WinPEISOFile`""
+        }
+        
+    }
+    Invoke-Process $OSCDIMG $OSCDIMGArgs
+    WriteLog "ISO created successfully"
+    WriteLog "Cleaning up $WinPEFFUPath"
+    Remove-Item -Path "$WinPEFFUPath" -Recurse -Force
+    WriteLog 'Cleanup complete'
+}
+if($Capture){
+    New-PEMedia -Capture $Capture
+}
+if($Deploy){
+    New-PEMedia -Deploy $Deploy
+}

FFUDevelopment/USBImagingToolCreator.ps1

@@ -4,22 +4,34 @@ param(
     $DeployISOPath,
     [Switch]$DisableAutoPlay
 )
-$Host.UI.RawUI.WindowTitle = 'USB Imaging Tool Creator'
+$Host.UI.RawUI.WindowTitle = 'Imaging Tool USB Creator'
 
 if($DeployISOPath){
 $DevelopmentPath = $DeployISOPath | Split-Path
+$ImagesPath = "$DevelopmentPath\FFU"
 function WriteLog($LogText) { 
 $LogFileName = '\Script.log'
 $LogFile = $DevelopmentPath + $LogFilename
     Add-Content -path $LogFile -value "$((Get-Date).ToString()) $LogText" -Force -ErrorAction SilentlyContinue
     Write-Verbose $LogText
 }
-Function Get-USBDrive {
-    $USBDrives = (Get-WmiObject -Class Win32_DiskDrive -Filter "MediaType='Removable Media'")
-    If ($USBDrives -and ($null -eq $USBDrives.count)) {
-        $USBDrivesCount = 1
+
+function Write-ProgressLog {
+        param(
+            [string]$Activity,
+            [string]$Status
+        )
+        Write-Progress -Activity $Activity -Status $Status -PercentComplete (($currentStep / $totalSteps) * 100)
+        WriteLog $Status
+        $script:currentStep++
+      
     }
-    else {
+Function Get-RemovableDrive {
+writelog "Get information for all removable drives"
+$USBDrives = Get-WmiObject Win32_DiskDrive | Where-Object {$_.MediaType -eq "Removable media"} 
+If($USBDrives -and ($null -eq $USBDrives.count)) {
+        $USBDrivesCount = 1
+    } else {
         $USBDrivesCount = $USBDrives.Count
     }
     WriteLog "Found $USBDrivesCount USB drives"
@@ -27,20 +39,23 @@ Function Get-USBDrive {
     if ($null -eq $USBDrives) {
         WriteLog "No removable USB drive found. Exiting"
         Write-Error "No removable USB drive found. Exiting"
+        Pause
         exit 1
     }
-    return $USBDrives, $USBDrivesCount
-}
+  return $USBDrives, $USBDrivesCount
+  }
+  
 Function Build-DeploymentUSB{
       param(
             [Array]$Drives       
             )
-            writelog "Checking if ffu files are present in the ffu folder"
-            $Images = Get-ChildItem -Path $FFUPath -Filter "*.ffu" -File -Recurse
+            writelog "Creating list of FFU image files"
+            $Images = Get-ChildItem -Path $ImagesPath -Filter "*.ffu" -File -Recurse
             writelog "Checking if drivers are present in the drivers folder"
             $Drivers = Get-ChildItem -Path $DriversPath -Recurse
             $DrivesCount = $Drives.Count
-            Writelog "Creating partitions..."
+            Write-ProgressLog "Create Imaging Tool" "Creating partitions..."
+            writelog "Create job to partition each usb drive"
             foreach ($USBDrive in $Drives) {
             $DriveNumber = $USBDrive.DeviceID.Replace("\\.\PHYSICALDRIVE", "")
             $Model = $USBDrive.model
@@ -65,7 +80,7 @@ Function Build-DeploymentUSB{
     if($DrivesCount -gt 1){
     writelog "Get file system information for all drives"
     $Partitions = Get-Partition | Get-Volume
-    }else{
+    } else {
     writelog "Get file system information for drive number $DiskNumber"
     $Partitions = Get-Partition -DiskNumber $DriveNumber | Get-Volume
     }
@@ -97,13 +112,21 @@ $Destination = $Drive + ":\"
             [string]$SFolder,
             [string]$DFolder
         )
+        New-Item -Path $DFolder -ItemType Directory -Force -Confirm: $false | Out-Null
         Robocopy $SFolder $DFolder /E /COPYALL /R:5 /W:5 /J
     }
 
     WriteLog "Start job to copy all FFU files to $Destination"
-    Start-Job -ScriptBlock $jobScriptBlock -ArgumentList $FFUPath, $Destination | Out-Null
+    Start-Job -ScriptBlock $jobScriptBlock -ArgumentList $ImagesPath, $Destination | Out-Null
     }
 }
+if(!($Images)){
+    foreach ($Drive in $DeployDrives) {
+        WriteLog "Create images directory"
+        $drivepath = $Drive + ":\"
+        New-Item -Path "$drivepath" -Name Images -ItemType Directory -Force -Confirm: $false | Out-Null
+        }
+}
 if($Drivers){
 writelog "Copying driver files to all drives labeled deploy concurrently"
 foreach ($Drive in $DeployDrives) {
@@ -128,14 +151,14 @@ if(!($Drivers)){
         }
 }
 if($DrivesCount -gt 1){
-Writelog "Building $DrivesCount drives concurrently...Please be patient..."
-}else{
-Writelog "Building the imaging tool on $model...Please be patient..."
+Write-ProgressLog "Create Imaging Tool" "Building $DrivesCount drives concurrently...Please be patient..."
+} else {
+Write-ProgressLog "Create Imaging Tool" "Building the imaging tool on $model...Please be patient..."
 }
 Get-Job | Wait-Job | Out-Null
 
 Dismount-DiskImage -ImagePath $DeployISOPath | Out-Null
-Writelog "Drive creation jobs completed..."
+Write-ProgressLog "Create Imaging Tool" "Drive creation jobs completed..."
 }
 
 Function New-DeploymentUSB {
@@ -154,7 +177,7 @@ Function New-DeploymentUSB {
         $DriveSize = [math]::round($Drives[$i].size/1GB, 2)
         $DiskNumber = $Drives[$i].DeviceID.Replace("\\.\PHYSICALDRIVE", "")
 	    $Properties = [ordered]@{Number = $i + 1  ; DriveNumber = $DiskNumber ; DriveModel = $driveModel ; 'Size (GB)' = $DriveSize} 
-
+        
         $Drivelist += New-Object PSObject -Property $Properties
         }
         if($Count -gt 1){
@@ -167,20 +190,15 @@ Function New-DeploymentUSB {
             $var = $true
             $DriveSelected = Read-Host 'Enter the drive number to apply the .iso to'
             $DriveSelected = ($DriveSelected -as [int]) -1
-            if($Last){
-            writelog "All drives selected"
-            }else{
-            writelog "Drive $DriveSelected selected"}
+            writelog "Drive $DriveSelected selected"
             }
-            catch {
+
+        catch {
             Write-Host 'Input was not in correct format. Please enter a valid FFU number'
             $var = $false
         }
     } until (($DriveSelected -le $Count -1 -or $last) -and $var)
-
-    $DisableAutoPlayCurrentSetting = (Get-ItemProperty -Path "HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers" -Name DisableAutoplay).DisableAutoplay
-    if($DisableAutoPlay -and $DisableAutoPlayCurrentSetting -ne 1){
-    writelog "Disable autoPlay current setting is $DisableAutoPlayCurrentSetting"
+    if($DisableAutoPlay){ 
     WriteLog "Setting the registry key to disable autoplay for all drives"
     Set-ItemProperty -Path "HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers" -Name "DisableAutoplay" -Value 1 -Type DWORD
     }
@@ -193,16 +211,16 @@ Function New-DeploymentUSB {
     if($Selection -eq $last){
     Read-Host -Prompt "ALL DRIVES SELECTED! WILL ERASE ALL CURRENTLY CONNECTED USB DRIVES!! Press ENTER to continue"
     Build-DeploymentUSB -Drives $Drives
-    }else{
+    } else {
     Read-Host -Prompt "Drive number $Selection was selected. Press ENTER to continue"
     Build-DeploymentUSB -Drives $Drives[$DriveSelected]
     }
     WriteLog "Setting the registry key to re-enable autoplay for all drives"
     if($DisableAutoPlay){
-    Writelog "Setting disable autoplay setting back to $DisableAutoPlayCurrentSetting"
-    Set-ItemProperty -Path "HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers" -Name "DisableAutoplay" -Value $DisableAutoPlayCurrentSetting -Type DWORD
+    Write-ProgressLog "Create Imaging Tool" "Enabling Autoplay"
+    Set-ItemProperty -Path "HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers" -Name "DisableAutoplay" -Value 0 -Type DWORD
     }
-    Writelog "Completed!"
+    Write-ProgressLog "Create Imaging Tool" "Completed!"
 }    
 #Get USB Drive and create log file
 if(Test-Path "$DevelopmentPath\Script.log"){
@@ -211,12 +229,15 @@ New-item -Path $DevelopmentPath -Name 'Script.log' -ItemType "file" -Force | Out
 }
 WriteLog 'Begin Logging'
 WriteLog 'Getting USB drive information and usb drive count'
-$USBDrives,$USBDrivesCount = Get-USBDrive
+$USBDrives,$USBDrivesCount = Get-RemovableDrive
+WriteLog 'Setting first step for percentage progress bar'
+$currentStep = 1 
 New-DeploymentUSB -Drives $USBDrives -Count $USBDrivesCount
+
 read-host -Prompt "USB drive creation complete. Press ENTER to exit"
 
 Exit
-}else{
+} else {
 Write-Host "No .ISO file selected..."
 read-host "Press ENTER to Exit..."
 Exit

FFUDevelopment/WinPECaptureFFUFiles/CaptureFFU.ps1

@@ -1,5 +1,6 @@
 #Modify the net use W: \\192.168.1.158\FFUCaptureShare /user:ffu_user ddb1f077-3eed-433c-b4d9-7b8cd54ce727
 net use W: \\192.168.1.158\FFUCaptureShare /user:ffu_user ddb1f077-3eed-433c-b4d9-7b8cd54ce727
+#Custom naming placeholder
 
 $AssignDriveLetter = 'x:\AssignDriveLetter.txt'
 Start-Process -FilePath diskpart.exe -ArgumentList "/S $AssignDriveLetter" -Wait -ErrorAction Stop | Out-Null
@@ -11,53 +12,89 @@ reg load "HKLM\FFU" $Software
 
 $SKU = Get-ItemPropertyValue -Path 'HKLM:\FFU\Microsoft\Windows NT\CurrentVersion\' -Name 'EditionID'
 [int]$CurrentBuild = Get-ItemPropertyValue -Path 'HKLM:\FFU\Microsoft\Windows NT\CurrentVersion\' -Name 'CurrentBuild'
-$DisplayVersion = Get-ItemPropertyValue -Path 'HKLM:\FFU\Microsoft\Windows NT\CurrentVersion\' -Name 'DisplayVersion'
+if ($CurrentBuild -notin 14393, 17763) {
+    $WindowsVersion = Get-ItemPropertyValue -Path 'HKLM:\FFU\Microsoft\Windows NT\CurrentVersion\' -Name 'DisplayVersion'
+}
+$InstallationType = Get-ItemPropertyValue -Path 'HKLM:\FFU\Microsoft\Windows NT\CurrentVersion\' -Name 'InstallationType'
 $BuildDate = Get-Date -uformat %b%Y
 
 $SKU = switch ($SKU) {
     Core { 'Home' }
-    CoreN { 'HomeN'}
-    CoreSingleLanguage { 'HomeSL'}
+    CoreN { 'HomeN' }
+    CoreSingleLanguage { 'HomeSL' }
     Professional { 'Pro' }
-    ProfessionalN { 'ProN'}
+    ProfessionalN { 'ProN' }
     ProfessionalEducation { 'Pro_Edu' }
     ProfessionalEducationN { 'Pro_EduN' }
     Enterprise { 'Ent' }
-    EnterpriseN { 'EntN'}
+    EnterpriseN { 'EntN' }
     Education { 'Edu' }
-    EducationN { 'EduN'}
+    EducationN { 'EduN' }
     ProfessionalWorkstation { 'Pro_Wks' }
     ProfessionalWorkstationN { 'Pro_WksN' }
+    ServerStandard { 'Srv_Std' }
+    ServerDatacenter { 'Srv_Dtc' }
 }
 
-if($CurrentBuild -ge 22000){
-    $Name = 'Win11'
+if ($InstallationType -eq "Client") {
+    if ($CurrentBuild -ge 22000) {
+        $WindowsRelease = 'Win11'
+    }
+    else {
+        $WindowsRelease = 'Win10'
+    }
 }
-else{
-    $Name = 'Win10'
+else {
+    $WindowsRelease = switch ($CurrentBuild) {
+        26100 { '2025' }
+        20348 { '2022' }
+        17763 { '2019' }
+        14393 { '2016' }
+        Default { $WindowsVersion }
+    }
+    if ($InstallationType -eq "Server Core") {
+        $SKU += "_Core"
+    }
 }
 
-#If Office is installed, modify the file name of the FFU
-#$Office = Get-childitem -Path 'M:\Program Files\Microsoft Office' -ErrorAction SilentlyContinue | Out-Null
-$Office = Get-childitem -Path 'M:\Program Files\Microsoft Office' -ErrorAction SilentlyContinue
-if($Office){
-    $ffuFilePath = "W:\$Name`_$DisplayVersion`_$SKU`_Office`_$BuildDate.ffu"
-    $dismArgs = "/capture-ffu /imagefile=$ffuFilePath /capturedrive=\\.\PhysicalDrive0 /name:$Name$DisplayVersion$SKU /Compress:Default"
-    
-    
-}
-else{
-    $ffuFilePath = "W:\$Name`_$DisplayVersion`_$SKU`_Apps`_$BuildDate.ffu"
-    $dismArgs = "/capture-ffu /imagefile=$ffuFilePath /capturedrive=\\.\PhysicalDrive0 /name:$Name$DisplayVersion$SKU /Compress:Default"
-    
+if ($CustomFFUNameTemplate) {
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -replace '{WindowsRelease}', $WindowsRelease
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -replace '{WindowsVersion}', $WindowsVersion
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -replace '{SKU}', $SKU
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -replace '{BuildDate}', $BuildDate
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -replace '{yyyy}', (Get-Date -UFormat '%Y')
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -creplace '{MM}', (Get-Date -UFormat '%m')
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -replace '{dd}', (Get-Date -UFormat '%d')
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -creplace '{HH}', (Get-Date -UFormat '%H')
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -creplace '{hh}', (Get-Date -UFormat '%I')
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -creplace '{mm}', (Get-Date -UFormat '%M')
+    $CustomFFUNameTemplate = $CustomFFUNameTemplate -replace '{tt}', (Get-Date -UFormat '%p')
+    if($CustomFFUNameTemplate -notlike '*.ffu') {
+        $CustomFFUNameTemplate += '.ffu'
+    }
+    $dismArgs = "/capture-ffu /imagefile=W:\$CustomFFUNameTemplate /capturedrive=\\.\PhysicalDrive0 /name:$WindowsRelease$WindowsVersion$SKU /Compress:Default"
+} else {
+    #If Office is installed, modify the file name of the FFU
+    #$Office = Get-childitem -Path 'M:\Program Files\Microsoft Office' -ErrorAction SilentlyContinue | Out-Null
+    $Office = Get-ChildItem -Path 'M:\Program Files\Microsoft Office' -ErrorAction SilentlyContinue
+    if ($Office) {
+        $ffuFilePath = "W:\$WindowsRelease`_$WindowsVersion`_$SKU`_Office`_$BuildDate.ffu"
+    } else {
+        $ffuFilePath = "W:\$WindowsRelease`_$WindowsVersion`_$SKU`_Apps`_$BuildDate.ffu"
+    }
+    $dismArgs = "/capture-ffu /imagefile=$ffuFilePath /capturedrive=\\.\PhysicalDrive0 /name:$WindowsRelease$WindowsVersion$SKU /Compress:Default"
 }
 
 #Unload Registry
 Set-Location X:\
 Remove-Variable SKU
 Remove-Variable CurrentBuild
-Remove-Variable DisplayVersion
-Remove-Variable Office
+if ($CurrentBuild -notin 14393, 17763) {
+    Remove-Variable WindowsVersion
+}
+if($Office) {
+    Remove-Variable Office
+}
 reg unload "HKLM\FFU"
 #This prevents Critical Process Died errors you can have during deployment of the FFU - may not happen during capture from WinPE, but adding here to be consistent with VHDX capture
 Write-Host "Sleeping for 60 seconds to allow registry to unload prior to capture"
@@ -65,5 +102,4 @@ Start-sleep 60
 Start-Process -FilePath dism.exe -ArgumentList $dismArgs -Wait -PassThru -ErrorAction Stop | Out-Null
 #Copy DISM log to Host
 xcopy X:\Windows\logs\dism\dism.log W:\ /Y | Out-Null
-
 wpeutil Shutdown

FFUDevelopment/WinPEDeployFFUFiles/ApplyFFU.ps1

@@ -14,10 +14,6 @@ function Get-USBDrive(){
     return $USBDriveLetter
 }
 
-# function Get-HardDrive(){
-#     $DeviceID = (Get-WmiObject -Class 'Win32_DiskDrive' | Where-Object {$_.MediaType -eq 'Fixed hard disk media' -and $_.Model -ne 'Microsoft Virtual Disk'}).DeviceID
-#     return $DeviceID
-# }
 function Get-HardDrive(){
     $SystemInfo = Get-WmiObject -Class 'Win32_ComputerSystem'
     $Manufacturer = $SystemInfo.Manufacturer
@@ -59,11 +55,18 @@ function Set-DiskpartAnswerFiles($DiskpartFile,$DiskID){
 
 function Set-Computername($computername){
     [xml]$xml = Get-Content $UnattendFile
-    if($xml.unattend.settings.component.Count -ge 2){
-        #Assumes that Computername is the first component element
-        $xml.unattend.settings.component[0].ComputerName = $computername
-    }else{
-        $xml.unattend.settings.component.ComputerName = $computername
+    $components = $xml.unattend.settings.component
+    $found = $false
+    foreach ($component in $components) {
+        if ($component.ComputerName) {
+            $component.ComputerName = $computername
+            $found = $true
+            break
+        }
+    }
+    if (-not $found) {
+        WriteLog 'ComputerName element not found in unattend.xml.'
+        throw 'ComputerName element not found in unattend.xml.'
     }
     $xml.Save($UnattendFile)
     return $computername
@@ -127,33 +130,23 @@ function Invoke-Process {
 	
 }
 
-# This function can be used in instances where battery level might matter (e.g. installing firmware for Surface). The problem is that WinPE doesn't have
-# a driver for the battery installed, so you'll need to inject drivers, which can be tricky because just injecting the battery driver might not be enough,
-# you might also need other drivers that the battery driver is dependent on. 
-# function Get-Battery(){
-#     while (($BattLev = (Get-CimInstance win32_battery).EstimatedChargeRemaining) -lt "35")
-#     {
-#         WriteLog "Battery is currently at $BattLev`%. Waiting for 35`% to proceed..."
-#         Write-Host "Battery is currently at $BattLev`%. Waiting for 35`% to proceed..."
-#         Start-Sleep 60
-#     }
-
-#     WriteLog "Battery level is $BattLev `%, which is greater than 35'% applying FFU"
-#     Write-Host "Battery level is $BattLev `%, which is greater than 35'% applying FFU"
-# }
-
 #Get USB Drive and create log file
 $LogFileName = 'ScriptLog.txt'
 $USBDrive = Get-USBDrive
 New-item -Path $USBDrive -Name $LogFileName -ItemType "file" -Force | Out-Null
 $LogFile = $USBDrive + $LogFilename
-$version = '2407.1'
+$version = '2412.1'
 WriteLog 'Begin Logging'
 WriteLog "Script version: $version"
 
 #Find PhysicalDrive
 # $PhysicalDeviceID = Get-HardDrive
 $hardDrive = Get-HardDrive
+if($null -eq $hardDrive){
+    WriteLog 'No hard drive found. Exiting'
+    WriteLog 'Try adding storage drivers to the PE boot image (you can re-create your FFU and USB drive and add the PE drivers to the PEDrivers folder and add -CopyPEDrivers $true to the command line, or manually add them via DISM)'
+    Exit
+}
 $PhysicalDeviceID = $hardDrive.DeviceID
 $BytesPerSector = $hardDrive.BytesPerSector
 WriteLog "Physical BytesPerSector is $BytesPerSector"
@@ -432,10 +425,6 @@ If (Test-Path -Path $Drivers)
         Writelog 'No driver folders found'
     }
 }
-
-#If you want to enable battery level checking, uncomment the line below as well as the Get-Battery function near the top of the script
-#Get-Battery
-
 #Partition drive
 Writelog 'Clean Disk'
 try {
@@ -572,6 +561,12 @@ If (Test-Path -Path $Drivers)
     WriteLog 'Copying drivers succeeded'
 }
 
+WriteLog "Setting Windows Boot Manager to be first in the display order."
+Invoke-Process bcdedit.exe "/set {fwbootmgr} displayorder {bootmgr} /addfirst"
+WriteLog "Windows Boot Manager has been set to be first in the display order."
+WriteLog "Setting default Windows boot loader to be first in the display order."
+Invoke-Process bcdedit.exe "/set {bootmgr} displayorder {default} /addfirst"
+WriteLog "The default Windows boot loader has been set to be first in the display order."
 #Copy DISM log to USBDrive
 WriteLog "Copying dism log to $USBDrive"
 invoke-process xcopy "X:\Windows\logs\dism\dism.log $USBDrive /Y" 

FFUDevelopment/unattend/SampleUnattend_x64.xml

@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<unattend xmlns="urn:schemas-microsoft-com:unattend" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
+  <settings pass="specialize">
+    <!--<ComputerName> must be in the first Component Element  "Microsoft-Windows-Shell-Setup" . Do not change the order or remove it -->
+    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+      <ComputerName>MYCOMPUTER</ComputerName><!--Leave Default will be renamed-->
+      <TimeZone>Eastern Standard Time</TimeZone><!--Add Your Local TimeZone-->
+    </component>
+    <!-- Place additional Components Elements and Settings below here: -->
+    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+      <RunASynchronous>
+        <RunASynchronousCommand wcm:action="add">
+          <Order>1</Order>
+          <Path>cmd.exe /c date 09-07-2024</Path> <!--Set the device clock to the current date. Helpful when BIOS clocks out of sync. -->
+          <Description>Set system date to a specific date</Description>
+        </RunASynchronousCommand>
+      </RunASynchronous>
+    </component>
+  </settings>
+  <settings pass="oobeSystem">
+    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+      <InputLocale>0409:00000409</InputLocale><!--Set your Keybaord and System Local https://learn.microsoft.com/en-us/previous-versions/windows/it-pro/windows-8.1-and-8/hh825682(v=win.10) -->
+      <SystemLocale>en-US</SystemLocale>
+      <UILanguage>en-US</UILanguage>
+      <UserLocale>en-US</UserLocale>
+    </component>
+    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+      <OOBE>
+        <ProtectYourPC>3</ProtectYourPC> <!--Disable Diagnostic Data sent to Microsoft-->
+        <HideEULAPage>true</HideEULAPage><!--Hide the End User License agreement -->
+        <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE> <!--Show Wifi Setup -->
+      </OOBE>
+    </component>
+  </settings>
+</unattend>

FFUDevelopment/unattend/unattend_arm64.xml

@@ -1,8 +1,10 @@
-<?xml version="1.0" encoding="utf-8"?>
+<?xml version="1.0" encoding="utf-8"?>
 <unattend xmlns="urn:schemas-microsoft-com:unattend">
   <settings pass="specialize">
+  <!--<ComputerName> must be in the first Component Element  "Microsoft-Windows-Shell-Setup" . Do not change the order or remove it -->
     <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="arm64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       <ComputerName>MyComputer</ComputerName>
     </component>
+  <!--Place addtional Components Elements and settings below here. -->
   </settings>
-</unattend>
+</unattend>

FFUDevelopment/unattend/unattend_x64.xml

@@ -1,8 +1,10 @@
-<?xml version="1.0" encoding="utf-8"?>
+<?xml version="1.0" encoding="utf-8"?>
 <unattend xmlns="urn:schemas-microsoft-com:unattend">
   <settings pass="specialize">
+  <!--<ComputerName> must be in the first Component Element  "Microsoft-Windows-Shell-Setup" . Do not change the order or remove it -->
     <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       <ComputerName>MyComputer</ComputerName>
     </component>
+  <!--Place addtional Components Elements and settings below here. -->
   </settings>
-</unattend>
+</unattend>

README.md

@@ -1,19 +1,113 @@
 # Using Full Flash Update (FFU) files to speed up Windows deployment
 
-This repo contains the full FFU process that we use in US Education at Microsoft to help customers with large deployments of Windows as they prepare for the new school year. This process isn't limited to only large deployments at the start of the year, but is the most common.
+What if you could have a Windows image that has:
 
-This process will copy Windows in about 2-3 minutes to the target device, optionally copy drivers, provisioning packages, Autopilot, etc. School technicians have even given the USB sticks to teachers and teachers calling them their "Magic USB sticks" to quickly get student devices reimaged in the event of an issue with their Windows PC.
+- The latest Windows cumulative update
+- The latest .NET cumulative update
+- The latest Windows Defender Platform and Definition Updates
+- The latest version of Microsoft Edge
+- The latest version of OneDrive (Per-Machine)
+- The latest version of Microsoft 365 Apps/Office
+- The latest drivers from any of the major OEMs (Dell, HP, Lenovo, Microsoft) (yes, the latest, not some out of date enterprise CAB file from years ago)
+- Winget support so you can integrate any app available from Winget directly in your image
+- ARM64 support for the latest Copilot+ PCs
+- The ability to bring your own drivers and apps if necessary
+- Custom WinRE support
 
-While we use this in Education at Microsoft, other industries can use it as well. We esepcially see a need for something like this with partners who do re-imaging on behalf of customers. The difference in Education is that they typically have large deployments that tend to happen at the beginning of the school year and any amount of time saved is helpful. Microsoft Deployment Toolkit, Configuration Manager, and other community solutions are all great solutions, but are typically slower due to WIM deployments being file-based while FFU files are sector-based.
+And the best part: it takes less than two minutes to apply the image, even with all of these updates added to the media. After setting Windows up and going through Autopilot or a provisioning package, total elapsed time ~10 minutes (depending on what Intune or your device management tool is deploying).
+
+The Full-Flash update (FFU) process can automatically download the latest release of Windows 11, the updates mentioned above, and creates a USB drive that can be used to quickly reimage a machine.
 
 # Updates
 
-2406.1 has been released! Check out the changes in the new [Change Log](ChangeLog.md)
+2409.1 has been released! Check out the changes in the [Change Log](ChangeLog.md)
 
 # Getting Started
 
-If you're not familiar with Github, you can click the Green code button above and select download zip. Extract the zip file and make sure to copy the FFUDevelopment folder to the root of your C: drive. That will make it easy to follow the guide and allow the scripts to work properly.
+- Download the latest [release](https://github.com/rbalsleyMSFT/FFU/releases)
+- Extract the FFUDevelopment folder from the ZIP file (recommend to C:\FFUDevelopment)
+- Follow the doc: C:\FFUDevelopment\Docs\BuildDeployFFU.docx
 
-If extracted correctly, your c:\FFUDevelopment folder should look like the following. If it does, go to c:\FFUDevelopment\Docs\BuildDeployFFU.docx to get started.
+## YouTube Detailed Walkthrough
 
-![image](https://github.com/rbalsleyMSFT/FFU/assets/53497092/5400a203-9c2e-42b2-b24c-ab8dfd922ba1)
+The first 15 minutes of the following video includes a quick start demo to get started. Below the video are a list of chapters. This video was taken with the 2407.2 build. Features released after that will not be demonstrated in the video.
+
+[![Reimage Windows Fast with Full-Flash Update (FFU))](https://img.youtube.com/vi/rqXRbgeeKSQ/maxresdefault.jpg)](https://www.youtube.com/watch?v=rqXRbgeeKSQ "Reimage Windows Fast with Full-Flash Update (FFU))")
+
+Chapters:
+
+[00:00](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=0s) Begin
+
+[03:21](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=201s) Quick Start Prereqs
+
+[07:19](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=439s) Quick Start Demo
+
+[14:12](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=852s) Script Parameters
+
+[17:22](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=1042s) Obtaining Windows Media
+
+[25:55](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=1555s) Adding Applications
+
+[26:59](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=1619s) Adding M365 Apps/Office
+
+[29:21](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=1761s) Adding Applications via Winget
+
+[34:59](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=2099s) Bring your own Applications
+
+[36:01](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=2161s) Customizing InstallAppsAndSysprep.cmd
+
+[38:34](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=2314s) Demo - Application Configuration
+
+[49:43](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=2983s) Drivers
+
+[55:39](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=3339s) Automatically downloading drivers
+
+[57:28](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=3448s) Microsoft Surface drivers
+
+[58:55](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=3535s) Dell drivers
+
+[01:01:45](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=3705s) Lenovo drivers
+
+[01:03:16](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=3796s) HP drivers
+
+[01:05:25](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=3925s) Bring your own drivers
+
+[01:06:24](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=3984s) Demo - Drivers
+
+[01:11:55](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=4315s) Multi-model driver support
+
+[01:13:21](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=4401s) Device naming
+
+[01:18:30](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=4710s) Device enrollment
+
+[01:21:43](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=4903s) Autopilot
+
+[01:24:57](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=5097s) Provisioning packages
+
+[01:26:54](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=5214s) Custom WinRE
+
+[01:29:59](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=5399s) Demo - Putting it all together (Deep dive)
+
+[01:32:06](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=5526s) Downloading Lenovo 500w drivers
+
+[01:33:28](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=5608s) Downloading apps via Winget
+
+[01:36:54](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=5814s) Downloading Office, Defender, Edge, OneDrive
+
+[01:38:15](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=5895s) Building the Apps.iso
+
+[01:39:08](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=5948s) Applying Windows to the VHDX
+
+[01:40:16](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=6016s) Downloading and applying cumulative updates
+
+[01:41:44](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=6104s) Building the VM
+
+[01:48:13](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=6493s) Capturing the FFU
+
+[01:53:38](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=6818s) Creating USB drive
+
+[01:58:41](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=7121s) Deploying FFU
+
+[02:11:48](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=7908s) Troubleshooting
+
+[02:14:30](https://www.youtube.com/watch?v=rqXRbgeeKSQ&t=8070s) EDU Endpoint Office Hours