* feat(onboard): add browser-first guided handoff
* chore: drop release-only CHANGELOG edit from browser-handoff branch
* fix(onboard): make browser handoff reach the gateway on real installs
The presence probe connected as a raw shared-auth client with a possibly
SecretRef-managed token, which the gateway rejects as an unpaired Control UI
client ("device identity required"), so the handoff never fired and always
fell through to the terminal hatch. Read presence as a CLI-mode loopback client
(the trusted path every openclaw command uses) so operator.read is granted, and
share that one auth path between the reachability gate and the wait loop. Also
short-circuit when gateway.controlUi.enabled is false so onboarding does not open
a dead dashboard URL and block for the full timeout.
* fix(onboard): share resolved target between handoff gate and wait
The reachability preflight now resolves the same target (and shared secret) the
wait loop uses, and presents the configured secret to the CLI-mode presence
read. Known remaining limitation: on fresh quickstart gateways whose auth token
is written to config but resolved differently at runtime, the presence read is
rejected with a token mismatch and the handoff falls back to the terminal hatch.
Tracked for follow-up before enabling the browser handoff by default.
* docs(onboarding): mark phase 3 browser handoff as held with diagnosis
* docs(onboarding): phase 3 proven end-to-end; token-mismatch hold was a test artifact
* fix(onboard): satisfy docs-map and test-type gates for the handoff branch
* refactor(onboard): split guided manual stage
* feat(onboard): guided CLI onboarding with live AI verification and classic fallback
Interactive `openclaw onboard` (and bare `openclaw` on a fresh install) now
runs a guided flow with macOS-app parity: detect existing AI access, live-test
candidates with a real completion before persisting anything, walk down the
ladder on failure with mapped reasons, and offer verified manual API-key entry
from installed provider manifests (masked input). In-flow escapes: classic
wizard, Crestodian chat, skip-AI. Classic wizard gains an optional post-auth
live verification step. `--classic`, `--modern`, and `--non-interactive`
contracts unchanged. Docs corrected for post-#99935 routing.
Closes#101851
* improve(onboard): quiet probe diagnostics in wizard TTY, carry risk ack into classic escape
Candidate live-tests during guided setup are probes: rename their run id and
lane to the existing probe conventions (logging/subsystem.ts console
suppression, command-queue quiet probe lanes) so expected failures stop
leaking raw diagnostics into the Clack UI; file diagnostics unchanged. The
classic-wizard escape now passes the already-collected risk acknowledgement
through instead of re-prompting in the same session.
* fix(onboard): quiet the session-derived setup-inference probe lane too
The live-test run enqueues on two lanes: the explicit probe lane and one
derived from its temp session key. Extend the shared quiet-probe predicate to
cover the derived lane so a failing candidate cannot leak lane-task
diagnostics into the wizard TTY.
* improve(onboard): suppress subsystem console output during wizard live tests
Provider-transport subsystem loggers (model-fetch start/response, transport
errors) carry no run id, so probe suppression cannot catch them and a failing
candidate printed raw log lines into the Clack TTY. Reuse the TUI console
subsystem-filter seam via a finally-safe scoped helper around guided
activation and the classic live-verify; file logging is unchanged and the
gateway (macOS app) surface is unaffected.
* fix(onboard): never auto-replace a configured model when its live check fails
The re-run verification probe executes outside the configured workspace (setup
never runs workspace plugins), so a workspace-backed current model can fail
the check while working fine in the agent. Stop the auto ladder on an
existing-model failure and hand the decision to the manual stage instead of
silently persisting a different candidate as the default. Docs note the
fail-safe and the workspace caveat.
* feat(onboard): two-way switching between Crestodian chat and the menu wizards
From the chat, `open setup wizard`, `open classic wizard`, and `open channel
wizard for <channel>` hand off to the guided flow, the classic wizard, or the
masked `channels add` wizard after the chat TUI tears down (mirrors the
open-tui handoff; gateway surface gets a text pointer instead). The hosted
channel wizard no longer dead-ends at sensitive steps — it offers the switch
and remembers the channel. New read-only `channel info <channel>` operation
and ring-zero action surface label, blurb, configured state, and the real
docs URL from channel-setup discovery so the assistant can explain Slack or
Telegram prerequisites instead of guessing; both prompts instruct it to use
them. `channels add --channel <id>` now preselects the channel. Docs cover
the interchangeable flows.
* fix(onboard): avoid param reassignment in open-setup handoff
* improve(onboard): separate ask-about vs connect intent in channel prompt guidance
Live test showed the agent detouring an explicit connect request through
channel_info because the guidance said to consult it first. Both prompts now
distinguish asking about a channel (channel info + docs link) from asking to
connect (connect right away).
* fix(channels): mark channel token entry as sensitive input
The shared single-token prompt lacked sensitive:true, so terminal wizards
echoed pasted channel tokens and the Crestodian chat bridge (which refuses
plain-text secrets based on this flag) hosted the Telegram token step in
visible chat. Found live-testing the chat-to-wizard switch; pre-existing on
main but load-bearing for the masked-wizard contract this PR documents.
* fix(onboard): restore terminal state around the guided flow's TUI launch
Mirror the classic finalize handoff so the chat TUI never inherits the wizard
prompter's raw/paused terminal state on the default first-run path.
* fix(channels): type the token prompter mock for the sensitive-flag assertion
* fix(gateway): map the TUI-only open-setup action to none for app clients
Engine-side surface gating already prevents open-setup replies on the gateway
surface; this keeps the client-visible action enum stable even if that gate
ever regresses. (Reviewed with the switching round; missed in its commit.)
* docs: regenerate docs map for onboarding page changes
* feat(crestodian): AI-first conversational onboarding with typed-op guardrails
Interactive `openclaw onboard` (and bare `openclaw` on a fresh install) now
opens the Crestodian conversation: detection-backed first-run proposal
(Claude Code/Codex logins, API keys), persona AI turns for every free-form
message (configless local-runtime fallback, 60s deadline, deterministic
degradation), approval-gated typed operations, chat-hosted channel setup
(`connect <channel>`), config get/schema read ops with secret redaction, and
a post-write validation hook that feeds schema errors back for a self-fix
turn. Adds the additive gateway `crestodian.chat` method so app clients run
the same conversation. Classic wizard stays behind --classic/explicit flags;
non-interactive automation unchanged; `--modern` becomes a deprecated alias
for `openclaw crestodian`.
* feat(macos): Crestodian chat onboarding and importance-ordered permissions
Replace the gateway step-wizard page with a Crestodian chat over the new
crestodian.chat method (works before any model auth exists), sort the
permissions page by importance with no scrolling, drop the redundant manual
refresh, and bump the onboarding version.
* feat(crestodian): run the custodian on the real agent loop with a ring-zero tool
Crestodian conversations now execute through the same embedded agent runner
as regular agents: a persistent agent session with a single construction-gated
`crestodian` tool wrapping the typed operations (read actions free; mutations
require approved=true asserted from explicit user consent, audited, with
post-write config validation fed back into the loop). The engine prefers the
loop (configured models or the Codex app-server fallback) and degrades to the
single-turn planner, then to deterministic commands. Setup approval seeds the
crestodian exec approval so local model harnesses can run; the configless
Codex backend config now enables exec and direct tool loading (it was
dead-on-arrival behind tools.exec.mode=deny and the tool-search index).
* test(crestodian): type the engine mock signatures for the core test lane
* fix(crestodian): map the advertised create_agent tool action
* fix(crestodian): host-verified approval arming and a macOS setup completion gate
Review findings: the model-supplied approved flag alone could authorize
ring-zero mutations (prompt injection / model error), and removing the macOS
wizard gate let users Next past the Crestodian page with nothing configured.
Mutating tool actions now also require host-verified consent (the engine arms
approval only when the user's actual message is an explicit yes), and local
macOS onboarding blocks advancing until setup authored the config, using the
same signal the old step wizard checked.
* fix(crestodian): bind approval to the exact proposed operation and gate dot navigation
A generic yes no longer authorizes arbitrary mutations: denied mutating tool
calls register a canonical operation fingerprint (host-owned, per session),
and an armed turn executes only the identical call, once. The denial message
is arming-aware so the approved turn self-heals in one roundtrip, and the
agent protocol pre-registers proposals. macOS onboarding page dots now honor
the same setup-completion gate as the Next button.
* fix(crestodian): redact sensitive wizard answers, skip logged-out CLIs, gate programmatic advance
Sensitive channel-wizard answers (tokens, passwords) are redacted from the
AI-visible conversation history; setup and the onboarding welcome never pick
or advertise a definitively logged-out CLI as the model; and macOS
handleNext() honors the page gates for programmatic callers (chat handoff)
just like the Next button.
* fix(crestodian): align the onboarding welcome's configured predicate with the app gate
A valid config carrying only a default model (partial/hand-written) now still
gets the first-run proposal instead of the ready guide, so the macOS setup
gate can always be satisfied from the conversation.
* fix(crestodian): armed turns can never mint their own executable proposal
An approval-mismatched call inside an armed turn no longer re-registers and
invites a retry (which let the model swap the approved operation for another
in the same turn); it voids the approval entirely and requires a fresh yes.
Proposals register only in unarmed turns, which the agent protocol already
does when proposing.
* fix(onboard): route any explicit setup flag to the classic wizard
* fix(ci): satisfy new lint rules, tool-display guard, and generated artifacts for crestodian
* chore(i18n): refresh native inventory after permissions copy wrap
* fix(crestodian): harden conversational onboarding
* docs(crestodian): document conversational onboarding
* test(crestodian): type embedded runner mock
* fix(crestodian): close onboarding security gaps
* chore: retrigger ci
Fix live model inference edge cases across provider streaming, model switching, outbound delivery, and gateway tool resolution.
Includes live/provider issue fixes and leaves #89100 explicitly partial for the remaining FM-2 group routing case.
* Feat: LM Studio Integration
* Format
* Support usage in streaming true
Fix token count
* Add custom window check
* Drop max tokens fallback
* tweak docs
Update generated
* Avoid error if stale header does not resolve
* Fix test
* Fix test
* Fix rebase issues
Trim code
* Fix tests
Drop keyless
Fixes
* Fix linter issues in tests
* Update generated artifacts
* Do not have fatal header resoltuion for discovery
* Do the same for API key as well
* fix: honor lmstudio preload runtime auth
* fix: clear stale lmstudio header auth
* fix: lazy-load lmstudio runtime facade
* fix: preserve lmstudio shared synthetic auth
* fix: clear stale lmstudio header auth in discovery
* fix: prefer lmstudio header auth for discovery
* fix: honor lmstudio header auth in warmup paths
* fix: clear stale lmstudio profile auth
* fix: ignore lmstudio env auth on header migration
* fix: use local lmstudio setup seam
* fix: resolve lmstudio rebase fallout
---------
Co-authored-by: Frank Yang <frank.ekn@gmail.com>
Add a bundled Arcee AI provider plugin with ARCEEAI_API_KEY onboarding,
Trinity model catalog (mini, large-preview, large-thinking), and
OpenAI-compatible API support.
- Trinity Large Thinking: 256K context, reasoning enabled
- Trinity Large Preview: 128K context, general-purpose
- Trinity Mini 26B: 128K context, fast and cost-efficient
* Remove Qwen OAuth integration (qwen-portal-auth)
Qwen OAuth via portal.qwen.ai is being deprecated by the Qwen team due
to traffic impact on their primary Qwen Code user base. Users should
migrate to the officially supported Model Studio (Alibaba Cloud Coding
Plan) provider instead.
Ref: https://github.com/openclaw/openclaw/issues/49557
- Delete extensions/qwen-portal-auth/ plugin entirely
- Remove qwen-portal from onboarding auth choices, provider aliases,
auto-enable list, bundled plugin defaults, and pricing cache
- Remove Qwen CLI credential sync (external-cli-sync, cli-credentials)
- Remove QWEN_OAUTH_MARKER from model auth markers
- Update docs/providers/qwen.md to redirect to Model Studio
- Update model-providers docs (EN + zh-CN) to remove Qwen OAuth section
- Regenerate config and plugin-sdk baselines
- Update all affected tests
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
* Clean up residual qwen-portal references after OAuth removal
* Add migration hint for deprecated qwen-portal OAuth provider
* fix: finish qwen oauth removal follow-up
---------
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
Co-authored-by: Frank Yang <frank.ekn@gmail.com>
Add Standard API Key auth methods for China (dashscope.aliyuncs.com)
and Global/Intl (dashscope-intl.aliyuncs.com) pay-as-you-go endpoints
alongside the existing Coding Plan (subscription) endpoints.
Also updates group label to 'Qwen (Alibaba Cloud Model Studio)' and
fixes glm-4.7 -> glm-5 in Coding Plan note messages.
Co-authored-by: wenmeng zhou <wenmengzhou@users.noreply.github.com>
Replace the multi-step MiniMax onboarding wizard with 4 flat options:
- MiniMax Global — OAuth (minimax.io)
- MiniMax Global — API Key (minimax.io)
- MiniMax CN — OAuth (minimaxi.com)
- MiniMax CN — API Key (minimaxi.com)
Storage changes:
- Unify CN and Global under provider "minimax" (baseUrl distinguishes region)
- Profiles: minimax:global / minimax:cn (both regions can coexist)
- Model ref: minimax/MiniMax-M2.5 (no more minimax-cn/ prefix)
- Remove LM Studio local mode and Lightning/Highspeed choice
Backward compatibility:
- Keep minimax-cn in provider-env-vars for existing configs
- Accept minimax-cn as legacy tokenProvider in CI pipelines
- Error with migration hint for removed auth choices in non-interactive mode
- Warn when dual-profile overwrites shared provider baseUrl
Made-with: Cursor
Add Ollama as a auth provider in onboarding with Cloud + Local mode
selection, browser-based sign-in via /api/me, smart model suggestions
per mode, and graceful fallback when the default model is unavailable.
- Extract shared ollama-models.ts
- Auto-pull missing models during onboarding
- Non-interactive mode support for CI/automation
Closes#8239Closes#3494
Co-Authored-By: Jeffrey Morgan <jmorganca@gmail.com>
- Rename provider ID, constants, functions, CLI flags, and types from
"bailian" to "modelstudio" to match the official English name
"Alibaba Cloud Model Studio".
- Fix P2 bug: global endpoint variant now always overwrites baseUrl
instead of silently preserving a stale CN URL.
- Fix P1 bug: add modelstudio entry to PROVIDER_ENV_VARS so
secret-input-mode=ref no longer throws.
- Move Model Studio imports to top of onboard-auth.config-core.ts.
- Remove unused BAILIAN_BASE_URL export.
Made-with: Cursor
* add web search to onboarding flow
* remove post onboarding step (now redundant)
* post-onboarding nudge if no web search set up
* address comments
* fix test mocking
* add enabled: false assertion to the no-key test
* --skip-search cli flag
* use provider that a user has a key for
* add assertions, replace the duplicated switch blocks
* test for quickstart fast-path with existing config key
* address comments
* cover quickstart falls through to key test
* bring back key source
* normalize secret inputs instead of direct string trimming
* preserve enabled: false if it's already set
* handle missing API keys in flow
* doc updates
* hasExistingKey to detect both plaintext strings and SecretRef objects
* preserve enabled state only on the "keep current" paths
* add test for preserving
* better gate flows
* guard against invalid provider values in config
* Update src/commands/configure.wizard.ts
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
* format fix
* only mentions env var when it's actually available
* search apiKey fields now typed as SecretInput
* if no provider check if any search provider key is detectable
* handle both kimi keys
* remove .filter(Boolean)
* do not disable web_search after user enables it
* update resolveSearchProvider
* fix(onboarding): skip search key prompt in ref mode
* fix: add onboarding web search step (#34009) (thanks @kesku)
---------
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
Co-authored-by: Shadow <hi@shadowing.dev>
* feat: Add Kilo Gateway provider
Add support for Kilo Gateway as a model provider, similar to OpenRouter.
Kilo Gateway provides a unified API that routes requests to many models
behind a single endpoint and API key.
Changes:
- Add kilocode provider option to auth-choice and onboarding flows
- Add KILOCODE_API_KEY environment variable support
- Add kilocode/ model prefix handling in model-auth and extra-params
- Add provider documentation in docs/providers/kilocode.md
- Update model-providers.md with Kilo Gateway section
- Add design doc for the integration
* kilocode: add provider tests and normalize onboard auth-choice registration
* kilocode: register in resolveImplicitProviders so models appear in provider filter
* kilocode: update base URL from /api/openrouter/ to /api/gateway/
* docs: fix formatting in kilocode docs
* fix: address PR review — remove kilocode from cacheRetention, fix stale model refs and CLI name in docs, fix TS2742
* docs: fix stale refs in design doc — Moltbot to OpenClaw, MoltbotConfig to OpenClawConfig, remove extra-params section, fix doc path
* fix: use resolveAgentModelPrimaryValue for AgentModelConfig union type
---------
Co-authored-by: Mark IJbema <mark@kilocode.ai>
- Add 'minimax-api-key-cn' auth choice for Chinese users
- Reuse existing --minimax-api-key CLI option
- Use MINIMAX_CN_API_BASE_URL (https://api.minimaxi.com/anthropic)
- Similar to how moonshot supports moonshot-api-key-cn
Tested: build ✅, check ✅, test ✅
* initial commit
* removes assesment from docs
* resolves automated review comments
* resolves lint , type , tests , refactors , and submits
* solves : why do we have to lint the tests xD
* adds greptile fixes
* solves a type error
* solves a ci error
* refactors auths
* solves a failing test after i pulled from main lol
* solves a failing test after i pulled from main lol
* resolves token naming issue to comply with better practices when using hf / huggingface
* fixes curly lints !
* fixes failing tests for google api from main
* solve merge conflicts
* solve failing tests with a defensive check 'undefined' openrouterapi key
* fix: preserve Hugging Face auth-choice intent and token behavior (#13472) (thanks @Josephrp)
* test: resolve auth-choice cherry-pick conflict cleanup (#13472)
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Peter Steinberger <steipete@gmail.com>
Peter Steinberger