* fix(scripts): size the tsdown heap from the build's own cgroup budget
The build heap probe only read the cgroup root (/sys/fs/cgroup/memory.max and
the v1 equivalent). Those files exist only when the process runs in a
namespaced container cgroup; under systemd the budget lives on the process's
own slice, and the v2 root carries no limit at all. So every systemd-managed
build found no limit, fell back to /proc/meminfo MemTotal, and took the full
12288 MB default heap regardless of its actual budget.
Observed on a 15.4 GiB host: openclaw-main-update.service ran tsdown with
NODE_OPTIONS=--max-old-space-size=12288 while its user@999.service slice was
bounded at 5 GiB, reaching 3.2 GB RSS and 6.25 GB peak before the host began
OOM-killing unrelated services.
Resolve the limit from /proc/self/cgroup and walk that chain instead, reading
memory.high alongside memory.max (memory.high throttles reclaim rather than
failing allocation, so a heap above it stalls the build instead of OOM-ing),
and take the tightest bound found. Root paths stay as the container fallback,
and an explicitly injected path list still disables detection.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): resolve the build heap budget from the v1 memory controller too
The slice walk only accepted the unified 0:: record, so a legacy or hybrid
systemd host fell back to the root probe and kept taking host memory. One
resolver now walks both hierarchies leaf-to-root, which makes the static root
list its own depth-0 case and removes it.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): read cgroup controller mounts instead of assuming their paths
v1 controllers can be co-mounted at the cgroup root, where memory.limit_in_bytes
sits under the slice with no per-controller directory, so the hardcoded
/sys/fs/cgroup/memory probe missed the budget and the build took the full
12288MB default. Mount points now come from mountinfo.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): translate cgroup records through the mount root
mountinfo field 4 is the subtree a cgroupfs mount exposes. Under a container
mount the /proc/self/cgroup record stays host-absolute, so walking it verbatim
probed paths below the visible mount and the build fell back to host memory.
Records now translate through the mount root before the walk.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): skip cgroup mounts that cannot represent this process
Falling back to the mount root for a record outside the mount's subtree sized
the build from an unrelated cgroup: an inherited namespace clamped the heap to
the 2048MB floor from a foreign 1GiB limit. Non-representable mounts are now
skipped, and the blind root probe only runs when no memory record exists.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): keep every cgroup mount view, not just the last one seen
One hierarchy can be visible through several mounts and only some expose a
subtree containing this process. Retaining only the last view dropped the
budget whenever a non-representable bind view came later, sending the build
back to host MemTotal.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): decode octal-escaped mountinfo paths before matching cgroups
ClawSweeper P2 on 7e64ad61f7: the cgroup resolver compared mountinfo's mount
root and mount point verbatim. The kernel escapes space, tab, newline, and
backslash in those two fields, so any cgroup mounted under such a path never
matched, the bounded slice was missed, and heap sizing silently fell back to
host memory.
Decode both fields before matching. The decoder lives in scripts/lib beside the
other shared script helpers rather than inline, so the scripts program has one
copy rather than a new ad hoc one.
Regression test fails pre-fix: a v2 mount at "/sys/fs/cgroup\040dir" with a
5 GiB memory.high yields --max-old-space-size=12288 (host fallback) before the
fix and 4352 after.
Follow-up, deliberately not bundled here: src/infra/sqlite-wal.ts,
src/commands/doctor-state-integrity.ts, and src/plugins/bundled-source-overlays.ts
each carry their own private copy of this same decoder. Consolidating all four
into @openclaw/normalization-core is the right end state, but it touches a
shared package plus three core modules and belongs in its own reviewable change.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): resolve cgroup-namespace-relative records to their mount
ClawSweeper P1 on d6fe49dd3f: inside a cgroup namespace /proc/self/cgroup
reports the namespace root ("0::/") while mountinfo field 4 stays the host
subtree the cgroupfs was mounted from ("/docker/<id>"). relativeCgroupPath then
found no prefix match and returned null; because a memory record had already
been seen, the root probe was skipped and the build fell back to host MemTotal.
A constrained container therefore missed its own budget entirely.
That namespace root is exactly what the mount exposes at its mount point, so it
resolves to "/" rather than failing closed.
Regression test fails pre-fix: a "0::/" record against a /docker/2f1a9c mount
root with a 5 GiB memory.max yields --max-old-space-size=12288 before the fix
and 4352 after.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): reject inherited cgroup mount views instead of guessing
ClawSweeper P1 on b4d200c5d2: the previous commit resolved a namespace-relative
record against any mount root, including the inherited views cgroup_namespaces(7)
documents, whose field-4 root reads "/..". Which cgroup such a view exposes is not
derivable from mountinfo, so probing it can size the build from an unrelated
cgroup's limit.
Reject non-canonical mount roots outright. An undecidable view now falls back to
host sizing, which is current main's behavior, rather than silently adopting the
wrong budget.
Regression test covers the "/.." inherited mount: it must yield host MemTotal
sizing, not the 5 GiB limit sitting behind that mount.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): fail closed on namespace-root records against non-root mounts
ClawSweeper P1 on 731d3bbc8e: a "0::/" record does not prove that a mount
rooted at some other subtree exposes this process's cgroup. Resolving that pair
could cap the build heap from an unrelated cgroup's limit.
Return no mapping for it. An undecidable pair now falls back to host sizing,
which is current main's behavior, so the failure mode is a missed optimisation
rather than a wrong budget. The "/.." inherited-mount rejection stays; this
covers the broader ambiguous mapping it did not.
The namespace-relative test is repointed accordingly: an unrelated mounted
subtree must yield host sizing, not that subtree's limit.
Net production change: none (4 lines swapped).
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(build): cap tsdown heap to the real budget and refuse hosts that cannot build
The 2048MB floor was applied on top of a discovered cgroup limit, so a small
container was handed a heap larger than it could honour. Measured in real
cgroups, that does not OOM-kill, it thrashes: a 1500MiB container sat pinned at
its ceiling for 10 minutes with oom_kill at 0, never finished the second of
eleven invocations, and starved every other process on the host.
Cap to the discovered budget, then refuse up front when that budget cannot hold
the build. The threshold is the whole-build peak, not a single pass: a full
eleven-invocation build peaks at 4730MiB, so a 5GiB slice completes while 4GiB
and 2816MiB slices are both killed partway through the third invocation.
The refusal runs before any output is cleaned, so a host that cannot rebuild
does not also lose the build it has.
* fix(build): harden tsdown heap admission
* fix(build): guard the default tsdown plan
* fix(build): preserve runtime-only Docker builds
* fix(build): admit only declaration cache misses
* fix(build): scope heap admission to real budgets
* fix(build): guard direct unified declarations
* fix(build): guard the canonical tsdown config
* fix(build): satisfy cache planning lint
* fix(gateway): release empty orphan leases
* fix(build): cap cgroup budget by host memory
* fix(build): serialize the canonical tsdown config
* test(build): freeze host memory fixtures
* fix(build): honor cgroup v1 soft limits
* fix(build): respect cgroup v1 hierarchy mode
* fix(build): admit unified runtime plans
* fix(build): admit every unified runtime path
* fix(build): collect repeated tsdown filters
* fix(build): ignore cgroup v1 soft limits
* fix(build): use explicit heap override as opt-in
* refactor(build): simplify memory admission
* fix(build): harden constrained build recovery
* fix(ci): prebuild runtime before real CLI shards
* fix(build): honor runtime-only runner environment
* fix(ci): satisfy tooling shard lint
* feat: add LiteLLM provider types, env var, credentials, and auth choice
Add litellm-api-key auth choice, LITELLM_API_KEY env var mapping,
setLitellmApiKey() credential storage, and LITELLM_DEFAULT_MODEL_REF.
* feat: add LiteLLM onboarding handler and provider config
Add applyLitellmProviderConfig which properly registers
models.providers.litellm with baseUrl, api type, and model definitions.
This fixes the critical bug from PR #6488 where the provider entry was
never created, causing model resolution to fail at runtime.
* docs: add LiteLLM provider documentation
Add setup guide covering onboarding, manual config, virtual keys,
model routing, and usage tracking. Link from provider index.
* docs: add LiteLLM to sidebar navigation in docs.json
Add providers/litellm to both English and Chinese provider page lists
so the docs page appears in the sidebar navigation.
* test: add LiteLLM non-interactive onboarding test
Wire up litellmApiKey flag inference and auth-choice handler for the
non-interactive onboarding path, and add an integration test covering
profile, model default, and credential storage.
* fix: register --litellm-api-key CLI flag and add preferred provider mapping
Wire up the missing Commander CLI option, action handler mapping, and
help text for --litellm-api-key. Add litellm-api-key to the preferred
provider map for consistency with other providers.
* fix: remove zh-CN sidebar entry for litellm (no localized page yet)
* style: format buildLitellmModelDefinition return type
* fix(onboarding): harden LiteLLM provider setup (#12823)
* refactor(onboarding): keep auth-choice provider dispatcher under size limit
---------
Co-authored-by: Peter Steinberger <steipete@gmail.com>
- Remove specific machine type (CX22) and pricing
- Hetzner pricing and server types change frequently
- Keep focus on technical approach rather than costs
- Add Infrastructure as Code section to Hetzner installation docs
- Links to community-maintained Terraform repositories
- Provides alternative for users preferring IaC workflows
- Includes cost estimate and feature overview
Related: Discussion #12532
* docs: restructure Get Started tab and improve onboarding flow
- Flatten nested Onboarding group into linear First Steps flow
- Add 'What is OpenClaw?' narrative section to landing page
- Split wizard.md into streamlined overview + full reference (reference/wizard.md)
- Move Pairing to Channels > Configuration
- Move Bootstrapping to Agents > Fundamentals
- Move macOS app onboarding to Platforms > macOS companion app
- Move Lore to Help > Community
- Remove duplicate install instructions from openclaw.md
- Mirror navigation changes in zh-CN tabs
- No content deleted — all detail preserved or relocated
* docs: move deployment pages to install/, fix Platforms tab routing, clarify onboarding paths
- Move deployment guides (fly, hetzner, gcp, macos-vm, exe-dev, railway, render,
northflank) from platforms/ and root to install/
- Add 'Hosting and deployment' group to Install tab
- Slim Gateway & Ops 'Remote access and deployment' down to 'Remote access'
- Swap Platforms tab before Gateway & Ops to fix path-prefix routing
- Move macOS app onboarding into First steps (parallel to CLI wizard)
- Rename sidebar titles to 'Onboarding: CLI' / 'Onboarding: macOS App'
- Add redirects for all moved paths
- Update all internal links (en + zh-CN)
- Fix img tag syntax in onboarding.md
Jesse Merhi