* fix(scripts): size the tsdown heap from the build's own cgroup budget
The build heap probe only read the cgroup root (/sys/fs/cgroup/memory.max and
the v1 equivalent). Those files exist only when the process runs in a
namespaced container cgroup; under systemd the budget lives on the process's
own slice, and the v2 root carries no limit at all. So every systemd-managed
build found no limit, fell back to /proc/meminfo MemTotal, and took the full
12288 MB default heap regardless of its actual budget.
Observed on a 15.4 GiB host: openclaw-main-update.service ran tsdown with
NODE_OPTIONS=--max-old-space-size=12288 while its user@999.service slice was
bounded at 5 GiB, reaching 3.2 GB RSS and 6.25 GB peak before the host began
OOM-killing unrelated services.
Resolve the limit from /proc/self/cgroup and walk that chain instead, reading
memory.high alongside memory.max (memory.high throttles reclaim rather than
failing allocation, so a heap above it stalls the build instead of OOM-ing),
and take the tightest bound found. Root paths stay as the container fallback,
and an explicitly injected path list still disables detection.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): resolve the build heap budget from the v1 memory controller too
The slice walk only accepted the unified 0:: record, so a legacy or hybrid
systemd host fell back to the root probe and kept taking host memory. One
resolver now walks both hierarchies leaf-to-root, which makes the static root
list its own depth-0 case and removes it.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): read cgroup controller mounts instead of assuming their paths
v1 controllers can be co-mounted at the cgroup root, where memory.limit_in_bytes
sits under the slice with no per-controller directory, so the hardcoded
/sys/fs/cgroup/memory probe missed the budget and the build took the full
12288MB default. Mount points now come from mountinfo.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): translate cgroup records through the mount root
mountinfo field 4 is the subtree a cgroupfs mount exposes. Under a container
mount the /proc/self/cgroup record stays host-absolute, so walking it verbatim
probed paths below the visible mount and the build fell back to host memory.
Records now translate through the mount root before the walk.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): skip cgroup mounts that cannot represent this process
Falling back to the mount root for a record outside the mount's subtree sized
the build from an unrelated cgroup: an inherited namespace clamped the heap to
the 2048MB floor from a foreign 1GiB limit. Non-representable mounts are now
skipped, and the blind root probe only runs when no memory record exists.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): keep every cgroup mount view, not just the last one seen
One hierarchy can be visible through several mounts and only some expose a
subtree containing this process. Retaining only the last view dropped the
budget whenever a non-representable bind view came later, sending the build
back to host MemTotal.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): decode octal-escaped mountinfo paths before matching cgroups
ClawSweeper P2 on 7e64ad61f7: the cgroup resolver compared mountinfo's mount
root and mount point verbatim. The kernel escapes space, tab, newline, and
backslash in those two fields, so any cgroup mounted under such a path never
matched, the bounded slice was missed, and heap sizing silently fell back to
host memory.
Decode both fields before matching. The decoder lives in scripts/lib beside the
other shared script helpers rather than inline, so the scripts program has one
copy rather than a new ad hoc one.
Regression test fails pre-fix: a v2 mount at "/sys/fs/cgroup\040dir" with a
5 GiB memory.high yields --max-old-space-size=12288 (host fallback) before the
fix and 4352 after.
Follow-up, deliberately not bundled here: src/infra/sqlite-wal.ts,
src/commands/doctor-state-integrity.ts, and src/plugins/bundled-source-overlays.ts
each carry their own private copy of this same decoder. Consolidating all four
into @openclaw/normalization-core is the right end state, but it touches a
shared package plus three core modules and belongs in its own reviewable change.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): resolve cgroup-namespace-relative records to their mount
ClawSweeper P1 on d6fe49dd3f: inside a cgroup namespace /proc/self/cgroup
reports the namespace root ("0::/") while mountinfo field 4 stays the host
subtree the cgroupfs was mounted from ("/docker/<id>"). relativeCgroupPath then
found no prefix match and returned null; because a memory record had already
been seen, the root probe was skipped and the build fell back to host MemTotal.
A constrained container therefore missed its own budget entirely.
That namespace root is exactly what the mount exposes at its mount point, so it
resolves to "/" rather than failing closed.
Regression test fails pre-fix: a "0::/" record against a /docker/2f1a9c mount
root with a 5 GiB memory.max yields --max-old-space-size=12288 before the fix
and 4352 after.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): reject inherited cgroup mount views instead of guessing
ClawSweeper P1 on b4d200c5d2: the previous commit resolved a namespace-relative
record against any mount root, including the inherited views cgroup_namespaces(7)
documents, whose field-4 root reads "/..". Which cgroup such a view exposes is not
derivable from mountinfo, so probing it can size the build from an unrelated
cgroup's limit.
Reject non-canonical mount roots outright. An undecidable view now falls back to
host sizing, which is current main's behavior, rather than silently adopting the
wrong budget.
Regression test covers the "/.." inherited mount: it must yield host MemTotal
sizing, not the 5 GiB limit sitting behind that mount.
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(scripts): fail closed on namespace-root records against non-root mounts
ClawSweeper P1 on 731d3bbc8e: a "0::/" record does not prove that a mount
rooted at some other subtree exposes this process's cgroup. Resolving that pair
could cap the build heap from an unrelated cgroup's limit.
Return no mapping for it. An undecidable pair now falls back to host sizing,
which is current main's behavior, so the failure mode is a missed optimisation
rather than a wrong budget. The "/.." inherited-mount rejection stays; this
covers the broader ambiguous mapping it did not.
The namespace-relative test is repointed accordingly: an unrelated mounted
subtree must yield host sizing, not that subtree's limit.
Net production change: none (4 lines swapped).
Co-authored-by: jesse-merhi <79823012+jesse-merhi@users.noreply.github.com>
* fix(build): cap tsdown heap to the real budget and refuse hosts that cannot build
The 2048MB floor was applied on top of a discovered cgroup limit, so a small
container was handed a heap larger than it could honour. Measured in real
cgroups, that does not OOM-kill, it thrashes: a 1500MiB container sat pinned at
its ceiling for 10 minutes with oom_kill at 0, never finished the second of
eleven invocations, and starved every other process on the host.
Cap to the discovered budget, then refuse up front when that budget cannot hold
the build. The threshold is the whole-build peak, not a single pass: a full
eleven-invocation build peaks at 4730MiB, so a 5GiB slice completes while 4GiB
and 2816MiB slices are both killed partway through the third invocation.
The refusal runs before any output is cleaned, so a host that cannot rebuild
does not also lose the build it has.
* fix(build): harden tsdown heap admission
* fix(build): guard the default tsdown plan
* fix(build): preserve runtime-only Docker builds
* fix(build): admit only declaration cache misses
* fix(build): scope heap admission to real budgets
* fix(build): guard direct unified declarations
* fix(build): guard the canonical tsdown config
* fix(build): satisfy cache planning lint
* fix(gateway): release empty orphan leases
* fix(build): cap cgroup budget by host memory
* fix(build): serialize the canonical tsdown config
* test(build): freeze host memory fixtures
* fix(build): honor cgroup v1 soft limits
* fix(build): respect cgroup v1 hierarchy mode
* fix(build): admit unified runtime plans
* fix(build): admit every unified runtime path
* fix(build): collect repeated tsdown filters
* fix(build): ignore cgroup v1 soft limits
* fix(build): use explicit heap override as opt-in
* refactor(build): simplify memory admission
* fix(build): harden constrained build recovery
* fix(ci): prebuild runtime before real CLI shards
* fix(build): honor runtime-only runner environment
* fix(ci): satisfy tooling shard lint
`checks-windows-node-test` ran the whole 222-266s Windows body in a single
Blacksmith lane, so every run that scheduled it finished at 287-334s against a
~180s plateau. Measured across 45 canonical main runs it was the wall in all
seven runs that triggered it (324-519s vs a 210s median elsewhere).
Blacksmith's Windows class admits exactly 2 concurrent jobs (run 31865243804),
which is why the earlier 3-part split failed: its tail queued 211s behind a
finished part. Pin the split width to that measured capacity instead. The two
parts are balanced by measured per-project wall time -- part 1 keeps the old
list 1 plus list 2's non-infra projects (~108s), part 2 takes list 2's infra
project plus the old list 3 (~112s) -- so both land near 113s and the lane
stops setting the wall.
One canonical partition now serves every backend; the github-mode/dispatch
3-part variant and its separate file inventory are gone, along with the
single-lane `task: test` case and the per-row `matrix.runner` the collapsed
lane needed. The complete 65-file Windows inventory is preserved exactly, and
the guards pin the width on both sides (mutation-checked: restoring 3 parts
fails the matrix guard).
* feat(gateway): transfer node worker workspaces
* fix(gateway): harden node workspace transfer
* fix(gateway): isolate transfer HTTP contract
* fix(gateway): trim transfer HTTP exports
* ci: codify manual-only Node 22 compatibility
* ci: split remaining hosted tail lanes
* fix(qa-lab): carry the validated part index into the plan id type
* test(ci): repair hosted tail lane guards
* refactor: consolidate coercion ownership
Centralize four canonical coercion helpers, migrate exact core and plugin duplicates through narrow Plugin SDK facades, and enforce declaration and plugin-normalization ownership boundaries.
The sweep adds eight focused SDK exports while deleting more production and tooling code than it adds. User-visible behavior is unchanged except for safer equivalent object and UI parsing at existing boundaries.
* fix: guard integer option ownership
Register resolveIntegerOption with the canonical function owner and extend the declaration-guard fixture so future local duplicates fail validation.
* fix: keep integer helpers on numeric facade
Remove the unshipped duplicate string-coerce exports and route every affected plugin consumer through the existing number-runtime contract.
* fix: point numeric coercion to number runtime
Make boundary and declaration diagnostics recommend the canonical numeric facade, with failing-before coverage for both guidance paths.
* fix: gateway service commands refuse a named profile or relocated OPENCLAW_HOME
- Resolve the default install identity against the canonical state directory
for the active OpenClaw home and profile instead of the unprofiled OS
account default.
- `--profile <name>` / `--dev` project `.openclaw-<profile>` state and config
paths, so every named profile was classified as isolated state and refused
`install`, `start`, `stop`, `restart`, `uninstall`, Doctor service repair,
and self-update service handling.
- `OPENCLAW_HOME` relocates all OpenClaw path defaults and is documented for
running as a dedicated service user; a relocated home is now an install
identity. `HOME` alone still is not.
- An `OPENCLAW_STATE_DIR` or `OPENCLAW_CONFIG_PATH` pointing outside those
canonical paths is still treated as isolated state.
- Recovery guidance in the refusal message now names the paths that must match.
Verified: focused vitest shards for the changed suites plus the daemon, CLI,
and doctor suites that consume the identity check; tsgo core and core-test
lanes; oxlint; docs format, MDX, link, and map checks.
* fix(gateway): keep relocated homes isolated
* fix(config): validate service profile identity
* fix(daemon): enforce named-profile service ownership
* fix(update): reject drifted service selectors before probes
* test(windows): prove scheduled task lifecycle
* test(windows): harden scheduled task proof cleanup
* test(windows): bind lifecycle proof to checkout
* test(windows): normalize cleanup exit status
* test(windows): verify effective task privilege
* test(windows): protect scheduled task proof roots
* test(windows): prove listener-owned task lifecycle
* test(windows): fix scheduled task proof contracts
* test(windows): remove redundant mock coercions
* test(windows): measure fallback before task probes
* test(windows): prove scheduled task process origin
* fix(gateway): preserve unmanaged restart fallback
* test(gateway): cover denied restart ownership
* test(gateway): keep restart helper types private
* test(gateway): classify lifecycle helpers as test code
---------
Co-authored-by: Vincent Koc <vincentkoc@ieee.org>
resolveSshConfig and startSshPortForward spawned a hard-coded /usr/bin/ssh,
so SSH config discovery and gateway tunneling failed wherever the system ssh
client lives elsewhere: Windows (built-in OpenSSH under System32\OpenSSH) and
NixOS (/run/current-system/sw/bin).
Route both helpers through the existing resolveSystemBin("ssh", { trust:
"strict" }) resolver, and add the Windows built-in OpenSSH directory to the
resolver's trusted Windows locations (it had System32 but not the
System32\OpenSSH subdirectory where ssh.exe actually ships). Fail closed with
a clear diagnostic when no system ssh client is present.
Closes#83289.
Co-authored-by: Peter Steinberger <steipete@gmail.com>
* fix(release): terminate Windows package command trees
* fix(release): type package runner test output
* fix(release): scope package runner normalization to Windows
* test(release): run package timeout proof on Windows CI
---------
Co-authored-by: TheAngryPit <16145902+TheAngryPit@users.noreply.github.com>
Co-authored-by: Peter Steinberger <steipete@gmail.com>
Jesse Merhi